Front sliding door

I think this is pretty cool.  I should have taken some pictures of the sliding mechanism.  I will try to remember to do this later.  The door has about a 1" x 1" strip running the length of the bottom of it which is fastened with wood screws.  The door itself is two layers have 3/4" cedar epoxied together with the butts staggered.  It was then trimmed to size and planed down where needed for clearance.  The 1"x1" strip sits on top of a 1" strip of vinyl rubrail half oval and the wood strip is shaped to accept the rub rail.  The vinyl rub rail is very slick.