Front door rough fit.

I built a front door of two layers of cedar epoxied with butts staggered.  Now I need to build the door frame and sliding mechanism.

Started caulking the cabin.

I caulked most of the cabin and dry fitted the final siding piece on the front of the cabin.  I need to frame out for the sliding door before I'll know whether I need to adjust this last piece of trim.  The next step is to build the doors.

Primed

I think the boat looks really good with the white primer.  I think I'm going with all white on the cabin, with grey decks and contrasting window trim and doors.

Color scheme ideas?

 
I've painted the rooftop gloss white.  The hull is red.  What color should I use for the cabin and window trim?  I hope to launch the boat by the end of the summer. 

I need scuppers or drains for my decks. Ideas?

The decks are flat and at a 90 degree angle to the topsides.  There is a 2 inch gap between the outboard edge of the deck and the inside of the topside planking.  This is due to the 2 inch thick frames which you can see in the photos.  I believe the best way to drain water off the decks will be to have drains in the decks that take a 90 degree turn outboard and drain through the topsides.  There are some very expensive bronze fittings made for the this application, but it seems to me there must be a cheaper way to do it.  I need to research this.

some shanty boat updates

beam mold

Making a mold for laminating my rooftop beams.